How to Pick the Right Agar Chemical for the Job
Agar is an Australian chemical brand, and Freshway lists a broad Agar range for collection from our Arncliffe warehouse or delivery. This page is a job-first picker: start from the soil, the surface and the restrictions printed on the product page, then choose the Agar product. The area-by-area overview of the range lives in a separate Freshway guide, so this page does not repeat it.
How do you pick the right Agar product for a cleaning job?
Name the soil first, then the surface. Grease and baked-on fat point to an alkaline degreaser; sealed or polished floors need a product whose page allows that finish; outdoor runoff areas need a product described for sensitive sites. Then read the dilution, pH and restrictions on the Freshway product page and the Agar SDS.
That order matters because the same building can hold all three jobs. A kitchen exhaust hood, a polished vinyl corridor and a timber boardwalk do not share one answer, even if one drum would be easier to order. The Agar range guide for Australian facilities sorts the range by area. This article works the other way round: it starts with the job in front of you.
Step 1: describe the soil in plain words
Before opening a product page, write the soil down: grease film, dust and light marks, soap scum, food and drink spots on carpet, salt spray, or outdoor grime. Each of those suggests a different chemistry family. Grease and oil usually need alkaline detergency. Light daily soil on sealed floors usually needs a gentler, maintenance-type product. Spots on carpet need a spotter rather than a floor detergent.
Avoid choosing by a word such as “heavy duty” alone. Some heavy-duty products carry restrictions that rule them out on finished floors. The restriction is often more important than the strength.
Step 2: check the surface and its finish
The surface decides what the product must not do. Polished vinyl, sealed timber, terrazzo, marble, rubber, glass and carpet all react differently. A Freshway product page that names compatible surfaces is the first thing to read, and a stated restriction should be treated as a hard stop for that surface.
| Job | What to look for on the product page | Agar example listed by Freshway |
|---|---|---|
| Heavy grease on kitchen walls, hoods or workshop concrete | Alkaline degreaser, a heavy-duty dilution, and any “not suitable for” line | Ammodet (pH 11.8 and 1.4% free ammonia on the product page) |
| Daily wash and spray buff on polished hard floors | Named floor finishes, auto-scrubber and mopping dilutions | Scrub ’N’ Shine (polished vinyl, sealed timber, terrazzo and marble named on the page) |
| Outdoor areas where wash water may reach the environment | A low-toxicity or sensitive-area description, plus a pressure-washing dilution | Powerdet Eco (1:80 mopping and 1:160 light pressure washing on the page) |
| Food, drink and grease spots on carpet | Ready-to-use spotter, pH, and fibre notes | Spot Wiz (750 ml ready-to-use, pH 9.0 ± 0.5 on the page) |
The table only repeats what the current Freshway pages state. If a page changes, the live page wins over this article.
Step 3: heavy grease, and where a degreaser must stop
For thick grease, the Freshway Ammodet page lists a pH of 11.8, 1.4% free ammonia, a general dilution of 1 part to 100–200 parts warm water, and a heavy-duty grease dilution of 1 part to 60. The same page states that Ammodet is not suitable for polished floors or highly sealed timber because it will strip the wax. That restriction is the reason a degreaser is not a universal floor cleaner.
Ammonia-boosted, highly alkaline products call for the PPE, ventilation and first-aid information on the Agar SDS. The product page also describes glass use at the right dilution. Treat that as the page’s claim and check the SDS before you decant a degreaser into a window bottle.
Step 4: polished floors and daily maintenance
For polished hard floors, the question is whether the product keeps the finish. The Freshway Scrub ’N’ Shine page names polished vinyl tiles, sealed timber, terrazzo, marble and unsealed floors such as rubber. It lists 1:80–100 for auto-scrubbing, 1:40–80 for damp mopping without rinsing, and 1:15–1:50 for spray buffing with a rotary machine and a suitable polishing pad.
That is a maintenance product, not a stripper. If the finish is worn through, that is a separate stripping and recoating job. The reverse also holds: a stripper used for daily mopping will remove the finish you are trying to keep.
Step 5: outdoor and sensitive areas
Wash water from paths, decks and building surrounds can reach stormwater drains. The NSW EPA explains why the drain is just for rain. A product described for sensitive sites does not remove your obligation to manage runoff, but it narrows the chemistry to something designed for that setting.
The Powerdet Eco page also says it is suitable for pressure washers, auto-scrubbers and mopping. Its statements about waterways and septic systems are the product page’s claims; this article does not extend them to every discharge situation. If your site has its own trade-waste or stormwater rules, those rules apply first.
Step 6: read the SDS and dilute deliberately
Every chemical in this picker has an SDS. Freshway keeps an Agar safety data sheet library, and the supplier can provide the current SDS on request. Read hazard statements, PPE and first aid before the first use, and keep the SDS where staff can reach it.
SafeWork NSW sets out duties for hazardous chemicals and for chemical labelling, including decanted containers. WorkSafe Victoria publishes guidance on safety data sheets and hazardous substances.
Dilution is the other control. Measure, rather than pour by eye, and use the ratio printed for the task. The commercial cleaning chemical dilution guide covers measuring and mixing; this page does not repeat it.
When an Agar product is not the answer
Sometimes the right move is a different product family. If the site has standardised on Freshway’s own-label chemicals, the Freshway cleaning chemicals range by zone covers that range. If a job needs a disinfectant claim, check the claim on the specific product page and its documents rather than assuming a detergent will do. This page does not rank brands, and it does not call any product the right choice for every site.
Frequently asked questions
Can I use Agar Ammodet on a polished floor?
No. The Freshway Ammodet page states it is not suitable for polished floors or highly sealed timber because it will strip the wax. For polished floors, choose a product whose page names that finish, such as Scrub ’N’ Shine.
Where do the dilution figures in this article come from?
They are copied from the live Freshway product pages: Ammodet 1:100–200 and 1:60, Scrub ’N’ Shine 1:80–100, 1:40–80 and 1:15–1:50, and Powerdet Eco 1:80 and 1:160. If a page changes, follow the page and the label.
Where can I find the SDS for an Agar product?
Use the Freshway Agar safety data sheet library or the SDS page on the Agar website. Keep the current SDS with the product and make it available to staff before use.
Does a sensitive-area product mean wash water can go down any drain?
No. The product page describes the chemistry; it does not change the rules for your site. Keep wash water out of stormwater drains and follow any local water or trade-waste requirements.
Where can you get Agar chemicals near Arncliffe?
Agar products are grouped in the Agar collection. Our Arncliffe warehouse is a short drive from Turrella, Banksia and Sydenham. Same-day delivery within Sydney may be available for an additional fee if you contact us before you order, and orders can also be shipped Australia-wide.
Click & collect from our warehouse at 208 Princes Highway, Arncliffe NSW 2205 is available by prior arrangement only. We will notify you when the order is ready for collection, or contact us on 1300 567 002 for a delivered quote to your site.
Leave a comment