Polished concrete is a floor finish built into the slab, not a product applied to it, and the word covers three different jobs: mechanically ground and polished concrete, a densified and burnished slab, and a coating that looks like polish until it wears. What you can achieve depends on which one you are starting from.
Grinding, densifying, burnishing or coating
A true polished finish is created by grinding the slab through progressively finer diamond abrasives, densifying it, and polishing with high-speed machines. On an existing slab you can achieve a maintenance shine by cleaning properly, densifying where it is dusty, and burnishing with the right machine and pad.
Prices are Freshway catalogue prices as at 16 September 2026 and are subject to change. Confirm the current price, and whether GST applies, before quoting.
Which of the three do you have?
- Mechanically polished concrete. Aggregate is visible, the surface is dense and reflective, and it is maintained by cleaning and occasional re-polishing of the top grits.
- Densified and burnished concrete (a "cream" polish). The slab has been treated with a chemical densifier and polished at the surface, giving a matte or satin sheen without exposing aggregate.
- Coated concrete. A sealer or epoxy provides the gloss. This is the common one in warehouses and workshops, and it is maintained by cleaning and, eventually, recoating.
Can you polish an existing concrete floor?
You can improve an existing slab without a full grind-and-polish: clean it properly, remove any coating residue, apply a densifier where the surface is soft or dusty, and burnish with a high-speed machine. What you cannot do is turn a worn warehouse slab into a mirror finish without diamond grinding, which is a specialist contractor with dust extraction and a wet-grind setup.
| Item | Use | Price |
|---|---|---|
| Polivac PV25 suction polisher | Burnishing and scrubbing large hard floors | A$3,245.00 |
| Polivac PV25TS dual speed | Scrub and burnish in one machine | A$3,895.00 |
| Polivac A23HS high speed | High-speed burnishing, compact | A$2,150.00 |
| Cleanstar Polystar orbital | Orbital polishing and cleaning | A$999.00 |
| Polivac dust bag | Dust control on the PV25 | A$179.09 |
The preparation nobody wants to do
Polish over a dirty floor seals the dirt in. The sequence for an existing slab is: strip any wax or coating residue, scrub with an alkaline cleaner, rinse and extract so nothing is left behind, densify if the surface is dusty, then burnish with a matched pad. Skipping the rinsing step is why floors look patchy a week later.
The downsides of polished concrete
It is honest to tell a client these before the work starts. Polished concrete is hard underfoot, which matters in a workplace where people stand all day; it is slippery when wet unless it has been treated for slip resistance; it shows every footprint on a dark slab; and it is unforgiving of dropped items. On the other side it is dust-free, easy to clean in bulk, and lasts decades without recoating.
Maintenance, once it is polished
A polished floor is maintained with a neutral cleaner, a microfibre or a scrubber-dryer, and a scheduled high-speed burnish. Do not use acid on it, do not use abrasive pads on the polished surface, and if it is coated, keep the cleaner neutral so the coating survives. Dust control matters more than chemical strength: dust is what dulls a finish.
Cost, downtime and what to tell a client
Be direct about the three trade-offs. A mechanically polished floor is a capital project with dust control, downtime and a specialist contractor. A densified and burnished finish is a maintenance upgrade you can do over a weekend. A coating is the cheapest route to a gloss and the one that needs recoating eventually.
Then set expectations on the finish. Polished concrete shows every mark on a dark slab, it is louder underfoot than carpet or vinyl, and it needs a slip assessment if the area gets wet. Clients who are told that before the work tend to be satisfied with the result; clients who are not tend to describe it as patchy.
Machines, pads and the maintenance cycle
A burnishing programme is a machine, a pad and a frequency. The machine is a high-speed rotary or an orbital unit, the pad is matched to whether you are cleaning or polishing, and the frequency is what keeps the finish looking new: daily dust control, weekly or fortnightly burnishing on a retail floor, monthly on a warehouse slab.
Two details matter on the equipment side. Dust control on the machine — either a dust bag or a vacuum attachment — is what stops the burnish pass scratching the surface with its own grit, and regular pad changes stop a loaded pad burnishing heat marks into the floor. Both are cheap compared with re-polishing a slab.
Questions we get asked most
- Can I polish my concrete floors myself?
- You can maintain an existing finish and improve a matte slab with a densifier and a burnishing machine. Creating a true polished finish requires diamond grinding and extraction, which is specialist work.
- Can I polish an existing concrete floor?
- Yes, to a satin level, with cleaning, densifying and burnishing. Expect the result to depend on the slab: hard, dense concrete polishes well, and dusty or soft slabs need densification first.
- How to make concrete floors look shiny?
- The shine comes from a densified, burnished surface or from a coating. Polish over a soiled or coated floor is what produces a patchy, dull result.
- What are the downsides of polished concrete floors?
- Hard underfoot, slippery when wet unless treated, unforgiving of impacts, and it shows marks on dark slabs. It is also difficult to patch invisibly if the slab is damaged.
- Do polished concrete floors need sealing?
- Mechanically polished concrete is densified rather than sealed; a coating is a different finish with different maintenance. Ask which one you have before buying a sealer.
References
Not sure which finish you have?
Send a photo of the floor and tell us what it is used for, and we will tell you whether it is a maintenance job or a grinding job. Browse cleaning chemicals or ask our team.



