Supastar - Floor Cleaner

Supastar - Floor Cleaner

All surface safe, neutral floor cleaner. Fresh citrus aroma

All surface, safe neutral floor cleaner formulated to keep floors shiny - no sticky residue, no rinsing, fast-action performance. Micro cleans the floor at pH 7 with a gentle free rinse action that doesn't blush or dull high gloss floors. Fresh clean fragrance. Our most popular neutral floor cleaner. Highly biodegradable. It is the perfect, full fragrance, high performance cleaner formulated for both delicate floors like marble, terrazzo and slate as well as timber floors, yet with the power punch detergency to remove heavy grime buildup and sludge found in Supermarkets and fruit and vegetables markets.

It is a non acid and non alkaline formula so SUPASTAR won't blush, burn or bite at your gloss or haze the thinnest of floor sealer coats.

Without the greasy residue found with normal detergent you'll find it a great performer on ceramic and quarry tile - and it won't leave a slippery residue.

Features

• Gentle free rinse action that doesn't blush or dull high gloss floors.
• Fresh clean citrus fragrance.
• Will not leave behind a greasy, sticky or slippery residue.
• pH: 7.0 - 7.2.
• Available in 15L ( Instore Only)
  

Direction For Use

Damp Mopping

Add approximately 100mls (approx 1/3 cup) per wringer bucket of cold water. If mopping prior to a recoat, use the double bucket technique or use a second person to rinse up heavy soiling if present. This helps prevent bounce in soil and extends stripping cycles.

Heavy Soilage

On extra soil add up to half a cup of SUPASTAR per wringer bucket of cold water.

Autoscrubbing

SUPASTAR is a low foamer and is ideally suited for auto scrubbing in shopping centres and supermarkets.

Mix 500mls per 50ltrs (1 to 100) cold water, for normal soilage. Use soft pads for delicate surfaces like granite, marble or terrazzo (white, tan or pale blue). Use red, blue or green pads or brushes that require a deep cleaning or scrubbing.

Cutting Back

SUPASTAR is ideal for light cutting back of floor finishers. Dilute 1 part SUPASTAR to 20 parts water, leave on for a few minutes and scrub with a blue or green pad and rinse prior to recoating

Brochure & Information

Safety Data Sheet