Shiner Spray Buff Total Floor Maintainer - Research Products

Shiner Spray Buff Total Floor Maintainer - Research Products

An easy way to mop a floor yet leaves behind a polymer film that enhances gloss depth when buffed. Good all round maintenance and spray buff. A total floor maintainer. 

It cleans, it's a spray 'n' buff, it restores, it reduces stripping cycles, it adds life to your polish, it assists buffability and mark removal. SHINER is a breakthrough in our quest for a chemical that reduces hard floor maintenance costs, particularly in supermarkets and shopping malls. Unique chemistry has enabled us to produce a multi-functional cleaner/maintainer that restores gloss and improves wearability as well as to increase mark resistance by increasing flexibility of the floor finish. Not only does SHINER clean up sticky spillages, tracked in dirt and marks, it extends the time between major strip and seals up to once per year because it won't yellow or build up on the floor - even when mopping or spray-buffed daily.

There's never a chance of being trapped in dirt, dulling or powdering with SHINER and its formulation has been developed to harness the energy advantage of the new super speed 500 to 1500 RPM floor machines to build a wet look gloss in seconds.

Features

• Cleans marks, greasy soils and eliminates minor scratches without affecting the floor finish
• Adds life to floor finish by extending the stripping cycle and reducing maintenance
• Stops surface powdering and improves anti-slip characteristics
• pH: 10.0 - 11.0
• Available in 5L (Online & Instore)
  

Direction For Use

Damp Mopping

Sealed Floors - Dilute SHINER 1 to 80 (approx half a cup per bucket), mop then buff. Unsealed Floors and heavily soiled areas - Diluted SHINER 1 to 40 (approx one cup per bucket), mop then buff.

Autoscrubbing - For best results, use Oates flamingo or white pads on Auto scrubber for high sheen surfaces. Dilute SHINER approx 1 to 100 parts wear for normal maintenance. If floor or terrazzo surface looks streaky after scrubbing, it is improperly sealed or solution strength is too high.

Spray Buffing - Spray buffing with SHINER heals minor scratches and removes most marks when immediately buffed after spraying with trigger spray. Dilute SHINER 1 to 15 parts water for normal soilage; 1 to 10 parts water for extra soilage or traffic wear.

Important

When recoating the floor, or if it becomes slippery, scrub or mop with a 1 to 80 solution of NEUTRACLEAN using a red or blue pad. This is not necessary if floor is being stripped.

Brochure & Information

Safety Data Sheet