Dangerous goods classification

1. Make the diluted solution as directed.
2. Liberally apply detergent to floor by mop, spray or auto-scrub solution without vacuum on.
3. Allow detergent to stand for 5 to 15 minutes (re-apply if necessary to keep solution wet).
4. Scrub with clean water in solution tank to rinse.
5. Thoroughly rinse with clean water and pick-up with wet/dry vacuum.

Mop & bucket

1. Make the diluted solution as directed.
2. Mop over surface and rinse with clean water.

Auto scrubbing

1. Polypropylene, Nylon or Tynex brushes should be used in the order of severity of soil. Polypropylene for the lightest soil, Tynex for the heaviest.
2. Once per week, usually on the lightest traffic day, scrub with water only.
3. If soil removal is not responding use SPLASH diluted 1 to 100 instead of plain water (only required on weekly basis).

1 to 40-60 parts water

1 to 50 – 200 parts water (vary dilution to suit soil level)

1. Sweep then apply GREASE RELEASE or ORANGE SOLV as directed to oil spills and allow soaking.
2. Make the diluted solution as directed or fill the scrubber solution tank with required volume of water followed by recommended volume of PUNCH.
3. Scrub area with vacuum and squeegee off.
4. Double scrub greasy areas.
5. If trails are left behind, quickly return with a damp mop and bucket to remove the excess water before it dries.
6. Pick up solution and perform final rinse with clean water.