Actichem Mould Remover – Mould Remover & Sanitiser

Actichem Responsibly Green Mould Remover RG615 – Oxygen Powered Mould and Sanitising Cleaner
Environmentally responsible, oxygen powered mould remover that rapidly kills mould, lifts stains and sanitises wet areas without harsh chemicals.

The Actichem Responsibly Green Mould Remover is a high-performance, environmentally responsible mould treatment and sanitiser designed for use in washrooms, changerooms and wet areas.

Formulated with hydrogen peroxide technology, this oxygen powered cleaner rapidly kills mould and mildew while lifting unsightly stains from tiles, grout and other hard surfaces. It delivers effective mould control without chlorine, acids or harsh chemicals, making it safer for users and suitable for sensitive environments.

With a neutral pH and non-hazardous formulation, Mould Remover is safe for use on most hard surfaces, including delicate natural stone commonly found in bathrooms. It also acts as a surface sanitiser, improving hygiene and eliminating odour-causing microorganisms in moisture-prone areas.

Supplied by Freshway Supplies, Actichem Responsibly Green Mould Remover provides professional-grade mould control for commercial, institutional and facility-managed environments across Australia.

Key features

• Professional oxygen powered mould remover
• Rapidly kills mould, mildew and microorganisms
• Lifts mould staining from tiles, grout and hard surfaces
• Neutral pH and non-hazardous formulation
• Safe for use on most hard surfaces, including natural stone
• Acts as a surface sanitiser for wet area hygiene
• Non-flammable and environmentally responsible
• Ready-to-use for convenient application
• Suitable for professional and commercial use

Technical specifications

Product name: Responsibly Green Mould Remover
Product code: RG615
pH: 7

Dilution: Ready to use
Fragrance: None
Colour: Clear
Safety classification: Non-hazardous

Pack sizes available:

• 5 litre
  

Surface compatibility

Suitable for use on ceramic and porcelain tiles, grout, concrete and masonry, plasterboard, rubber, timber, vinyl, carpet and upholstery.

Always pre-test sensitive substrates and delicate fibres for chemical sensitivity and colour fastness before use.

Application areas

• Washrooms and bathrooms
• Changerooms and locker rooms
• Laundries and wet areas
• Kitchens and food service wash zones
• Commercial and public facilities

Not suitable for use as a disinfectant in medical institutions.

How to use

Always read and understand the safety data sheet before use. Pre-test in an inconspicuous area prior to application.

Pre-clean surfaces to remove heavy organic build-up for best results. Apply Mould Remover using a sprayer or sponge and agitate if required. Allow a minimum dwell time of 60 seconds, then rinse thoroughly with clean water.

For heavy mould growth or staining, repeat the process with additional dwell time and agitation as required. Do not dilute and do not mix with other cleaning products.