Enzyme Wizard Multi-Purpose Bathroom / Kitchen Spray and Wipe
The enzymes in our Multi-Purpose Bathroom / Kitchen Spray and Wipe break down stains & odours into their basic elements. Carbon, hydrogen and other elements readily integrate with the environment instead of polluting it. Even mineral buildups like calcium and lime simply fall apart when our enzymes break down the organic ‘glue’ that holds it in place. Plus, our enzymes completely remove odours, leaving the room smelling fresh and truly clean without strong fragrances.
Features / Benefits
- pH Neutral Formula
- Unique Enzyme formula to remove Mould and Mildew
- Contains no caustic ingredients – Won’t damage the surface of tile or grout in bathrooms
- Only general wiping down of tiles is required.
- The Product does not contain soap and will not streak on any surface.
- No buildup of soap around taps and general areas.
- Can be disposed of down drains, enzyme will carry on breaking down organic matter in bathroom sinks.
How To Use
- Dilute the product at a ratio of 10:1 into the spray bottle. For general cleaning, wipe down the surface preferably with a microfiber cloth.
- In showers that have a slight buildup of mould (Black), spray the surface with the mould and mildew cleaner. Use a small brush e.g. like a toothbrush and rub up and down between the grouting while at the same time leaving the grouting wet with the solution. On the glass shower doors it is more effective to use a standard cloth than a microfiber cloth as there is more traction.
- It can be used in bathrooms to wipe down all surfaces as normal.
- Mirrors – One to two sprays initially onto mirror and then wipe down with a cloth (preferably microfiber). When it comes to mirrors, less is better.
Important Information
- For new mould use the dilution rates outlined on the packaging and follow general cleaning instructions.
- For mould that has been there for some time and that is embedded in the grout, mix a 1:1 solution and then scrub the grouting with a soft brush, not a hard brush as the bristles won’t get into the grouting because it is lower than the surface of the tile.
- In hard-to-reach areas of a shower or in anywhere in the bathroom, spray enzyme into the area for a couple of days, the mould should soften and all that is needed should be to wash the area down with water, if it does not then a bit of high pressure would be needed to loosen the mould.
- Do not mix the enzyme spray with any bleach or oxidisers as this will de activate the enzymes.
- It is also recommended that when starting to use the Enzyme Spray in the bathroom, use new microfiber cloths and any other brushes or equipment you use, as there maybe residual soap and or scum on the cloths or on the brushes.
- In a lot of cases mould will grow behind silicone in a shower, the quickest and best way to remove the mould is to remove the silicone, spray the area down. Scrub the area with a brush, allow it to dry and then re apply the silicone. For the next couple of days wash the area around the silicone down so that the enzyme spray can soak in.
- he most common area for mould to form is in the corners and along areas where two surfaces meet, this is because when one cleans one tends to miss the area or one cannot get into the crevasse or corner. Some preventative maintenance would be to spray enzyme onto the cloth and then just wipe along the crevasse and in the corners spray some enzyme.
