Actichem Tile & Grout Restore AP160
Actichem’s AP160 T&G Restore is a proprietary restoration cleaner for neglected, black grout lines and tiles. T&G Restore’s low pH formula contains no hydrochloric, hydrofluoric, phosphoric or sulphamic acids, but is more powerful and effective, yet safer and pleasant to use. T&G Restore makes quick work of mineral scale, cement/grout smear, efflorescence, soap scum and embedded stains. It provides tough action on general grime and is excellent for grout restoration ahead of applying a sealant.
T&G Restore is an advanced low pH technology grout and stone restoration compound which gives outstanding results while still being low in toxicity and OHS ratings.
Available in 5L (Online & In-store)
Key Benefits
-
Restoration Power - T&G Restore has the muscle to tackle years of efflorescence, mineral scale and alkaline detergent build-up
- Grout Specialist - Overcome stubborn grout stains, embedded soils and cement/grout smear
- A Total Solution - unparalleled cleaning punch, yet safe to use and non -corrosive on non-ferrous metals when used as recommended
How Does It Work
Always pre-test the cleaning solution on the surface to be cleaned to check for any substrate instability or incompatibility with T&G Restore. Observe all safety directions and read and understand the MSDS before use.
Usage: (Mineral scale build-up, efflorescence, cement residues and heavy duty applications)
- Mix 1 part T&G Restore with 10 to 30 parts water (100-30ml/Litre). Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry.
- Scrub thoroughly with applicable nylon scouring/floor pad or brush.
- Allow 10 to 30 minutes dwell time and re-agitate.
- Extract/Pick up resultant slurry with extraction equipment.
- Neutralize remaining residues by rinsing thoroughly with a 1:300 solution (30ml/10Lt) of T&G Cleaner Pro or Proneutro
Usage: (Grout residues and light duty applications)
- Mix 1 part T&G Restore with 80 to100 parts water (10-12ml/Litre) Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
- Scrub thoroughly with applicable nylon scouring/floor pad or brush
- Allow 10 to 30 minutes reaction time and re-agitate.
- Rinse well with clean water.
Safety
- Not classified as dangerous according to the Australian Dangerous Goods code.
- Classified as irritant according to the criteria of Worksafe Australia.
- Observe all safety recommendations made on the product label and MSDS
Recommended Applications
T&G Restore is safe on all man-made tiles. Use with care on sandstone, quarry tiles, terracotta and slate. T&G Restore can be used on granites and bluestones that have a flamed or sawn finish but should not be used on acid sensitive surfaces and polished surfaces including marble, limestone, polished granite and other natural stone. Although unlikely to mark non-ferrous metals (e.g. Aluminium), always pre-test before use.
Ideal for cleaning very dirty tiles. Especially good in restoration applications and washrooms, showers, pool surrounds, grout smear removal and builders cleans.
BROCHURE & INFORMATION
Safety Data Sheet ( PDF 262KB )
*** THIS PRODUCT WILL ATTRACT AN ADDITIONAL FREIGHT COST. PLEASE CONTACT PRIOR FOR DELIVERY REQUEST FOR BULK ORDERS. ***
