Agar STR-36 - Super Concentrated Floor Stripper

STR-36 is a powerful stripper for removing water-based floor sealers and polishes.

Benefits

• Powerful stripping action, even on stubborn coatings
• Rips through old polish, heavy build-ups and semi-permanent sealers
• Thoroughly removes sealers in one application - minimal need to re-strip areas. Saves labour
• Works best in cold water
• No ammonia smell
• Contains no caustic powders

For Use On

STR-36 is a low foaming stripper that leaves floors stripped and ready for recoating. It is ideal for stripping vinyl, terrazzo, marble, ceramic and quarry tiles. STR-36 is not recommended for use on rubber floors.

DO NOT use STR-36 on linoleum floors unless diluted to at least 1 in 20.

Specifications

Colour: Transparent, colourless liquid

Odour: Butyl odour

pH Level: 11.5 ±0.5

Foam: Low foaming

Available in the following options

Size

• 5L
• 20L (Special Order)

Directions For Use

• To remove heavy build-ups, dilute 1 part STR-36 with 4 parts cold water. For normal stripping work, dilute 1 part STR-36 with 8 parts cold water.
• Caution: for stripping linoleum or timber floors, dilute STR-36 to 1 in 20.
• Mop STR-36 solution over sealer and allow 5-10 minutes to activate. Do not splash the solution onto painted surfaces. Do not let solution run onto timber or carpeted floors.
• Keep the floor wet with solution – don’t let it dry out. Add more solution if necessary to keep the floor evenly wet.
• Scrub floor with a black or emerald pad under a slow-speed scrubbing machine.
• Mop up or wet-vac slurry when stripping is complete.
• Rinse floor 3 times with clean water using clean mops or auto scrubber. Rinsing is critical on porous floors and the addition of vinegar or NEUTRALIZER to the middle rinse is recommended.

Accessories

Chemical dispensing accessories

Downloads

Product Information Sheet

Safety Data Sheet