Search
0 Shopping Cart $0.00
CLOSE

YOUR SHOPPING CART IS CURRENTLY EMPTY

Do not hesitate. Check out our wide range of products!

Barricade - Hard Floor Care

Semi permanent, water based sub-surface waterproofing & stain blocker for limestone, concrete, terrazze, clay pavers, bricks & terracotta.

Water-based stain protector. It gives subsurface protection to stone, composite stone, marble, unglazed ceramics, smooth trowelled concretre. Can also be used to protect ornaments, sculptures, facades and columns. Invisible - use indoor and outdoor.

There has been an urgent need for a product that impregnates unglazed ceramics and composites of stone such as marble, limestone, sandstone, terrazzo as well as smooth trowelled and wood floated concrete. The concept being to lock out the staining and degrading effects of water, food based spills, animal fats, vegetable and mineral oils, sauces like soy and stains like red wine that can permanently ruin the appearance, whilst still allowing the surface to breath.

BARRICADE is a solution to this problem. Without the need of highly skilled tradesman it can be quickly and economically applied to easily stained surfaces such as limestone, marble and sandstone.

The main application will be for stone floors, sandstone patios and concrete. All these surfaces require a high level of appearance and slip safety. BARRICADE may also be used to protect ornaments, sculptures, facades and columns both indoors and outdoors.

Features

  • Does not alter the natural colour, texture and appearance of the stone
  • Does not alter the coefficient of friction or breathability of the surface
  • Safer to use than solvent based sealers
  • Enhances original colour richness of the surface
  • U.V. stable making it suitable for both indoor and outdoor use
  • pH: 12.0
  • Available in 5L (Online & Instore)

Direction For Use

Shake the container before use. Dilute only as directed on label. For best results dilute product 1 part BARRICADE to 10 parts water and apply with watering can until entire surface is saturated. Allow to penetrate surface for ten to fifteen minutes then squeegee or mop off excess.

Choosing a detergent is easy. For automatic scrubbing the product should be low or medium foaming, have a pH of between 6 and 8 (at use dilution) and contain no Butyl glycol.

We recommend Research Products SUPASTAR at dilution:

  • Mopping - approximately 1 to 60 parts water (3/4 cup bucket)
  • Autoscrubbing - approximately 1 to 100 parts water (500ml per 50L)

Dust Removal - dust mop surface with an electrostatic mop prior to scrubbing or mopping.

Autoscrub or mop the surface daily to remove surface soiling and spillage residues that may not have been picked up with day to day spot mopping. Use the same concentration daily except after the lowest traffic day (usually Monday). Scrub with water alone on that day to remove any possibility of detergent buildup. Using too much detergent can reduce the slip coefficient. By using water one day per week, you remove the chance of detergent buildup.

Product limitations

BARRICADE doesn't protect against the damaging effects of strong acids like hydrochloric, phosphoric based cleaners.

BARRICADE is not a water-proofing product and will not stop leakage through cracks in porous stone or concrete.

Brochure & Information

Safety Data Sheet ( PDF 463KB )

HOW MUCH WILL MY DELIVERY COST?

No matter where you live in Australia, our delivery service charges are as follows:


Godfreys Delivery Rates

Note: Please allow extra time for delivery around public holidays. In order to qualify for our delivery service

  • the products that you ordered have to be in stock
  • they must be ordered online
  • accurate delivery details must be provided
  • your delivery address must be within Australia
  • Authority to leave parcel at premises 

IF YOU HAVEN’T RECEIVED YOUR ONLINE ORDER OR IF YOU HAVE ANY QUESTIONS ABOUT AN ORDER THAT YOU HAVE PLACED, PLEASE CONTACT CUSTOMER SERVICE AND WE’LL GET ON THE CASE STRAIGHT AWAY.

HOW LONG WILL MY ORDER TAKE TO ARRIVE?

Here is an approximate guide to delivery times for online orders once they have been dispatched.

 

BUSINESS DAYS TO DELIVERY

NSW
City 1 Day
Regional 2-3 Days
VIC
Melbourne 1 Day
Regional 3-4 Days
Queensland
Brisbane 1-2 Days
Regional 3-4 Days
South Australia
Adelaide 2-3 Days
Regional 4-5 Days
Northern Territory
All Areas 4-6 Days
Western Australia
All Areas 4-6 Days
Tasmania
All Areas 4-6 Days
powered by proof factor - increase conversions with social proof notifications